ProductsPosition : Home > Products
 Low Voltage Motors >> YE3 Supper High Efficiency Induction Electric Motor (IE3)
YE3 Supper High Efficiency Induction Electric Motor (IE3)

Technical characteristics

Electrical performance data

Mechanical dimension data

Totally enclosed fan-cooled motors are designed according to IEC, GB and other standards.

The frames are made of cast iron, while terminal boxes can be made of steel plate.

The efficiency can meet the requirements of GB18613-2013 and IEC60034-30 standards.

Motors with frame 80-132 that are equipped with gasket sealing on DE are standard, and the standard for frame 160 and above motors are with sealing on DE.

Winding designs can support several kinds of voltage and frequency (50HZ or 60HZ).

It can stand 1.5 times more of rated current within 2 minutes (IEC60034-1).

Heater can be added to prevent moisture.

PTC, PT100 and other thermal elements can be chose to protect winding and bearings.


Product advantages

Efficiency improvement

New winding designs and low loss silicon steel sheets are applied to decrease the motors loss and improve the efficiency.

Reliable quality and superior characteristics

In order to insure the good insulation and extend the lifetime, standard motors are examined with F insulation and 80K temperature-rise.

Voltage, Efficiency

According to Class A voltage and frequency tolerance demands in IEC60034-1 standard, the motor’s voltage tolerance is ±5%, and the frequency tolerance is ±2%.

Rated output

Rated output means it can meet IEC 600341-1 standard, continuous working can output when coolant temperature (CT) is 40℃ and the altitude of working site is under 1000m. Besides, the motors can stand 1.5 times more of rated current within 2 minutes under rated voltage and frequency.


APPLICATIONS

Motors can be applied to all kinds of machines, such as machine tool, air compressor, pump, ventilation, reduction gear, transmission belt, mining equipment, metallic equipment. However, motors can’t be used with inflammable, explosive and corrosive working site.

Product technical standards

名称Title IEC标准
IEC standard
中国国家标准 Chinese standard
旋转电动机定额和性能
Rotating electrical machines-Part I:Rating and performance
IEC 60034-1 GB 755
旋转电动机损耗与效率确定的标准测试方法
losses and efficiency from tests(excluding machines for traction vehicles)
IEC 60034-2 GB/T 1032
旋转电机整体结构的防护等级(IP代码)分级
Rotating electrical machines-Part 5:Degrees of protection provided by the integral design of rotating electrical machines(IP code) -Classification
IEC 60034-5 GB/T 4942.1
旋转电动机冷却方法
Rotating electrical machines-Part6: Methods of cooling( IC Code)
IEC 60034-6 GB/T 1993
旋转电动机结构犁式、安装型式及接线盒位置的分类(IM代码)
Rotating electrical machines-Part7: Classification of types of construction, mounting arrangements and terminal box position( IM Code)
IEC 60034-7 GB/T 997
旋转电动机旋转电机线端标志与旋转方向
Rotating electrical machines-Part8: Terminal markings and direction of rotation
IEC 60034-8 GB/T 1971
旋转电机噪声测定方法及限值第9部分:噪声限值
Rotating electrical machines-Part9: Noise limits
IEC 60034-9 GB 10069.3
轴中心高为56mm及以上电机的机械振动振动的测量、评定及限值
Rotating electrical machines-Part14: Mechanical vibration of certain machines with shaft heights 56 mm and higher- Measurement, evaluation and limits of vibration severity
IEC 60034-14 GB 10068
旋转电机尺寸和输出功率等级第1部分:机座号56-400和凸缘号55-1080
Rotating electrical machines-Partl: Frame numbers 56 t0 400 and flange numbers 55 to 1080
IEC 60072-1 GB/T 4772.1
中小型旋转电机安全耍求
Safety requirments of small and medium size rotating electrical machines
GB 144711
旋转电动机温升
Electrical insulation-Thermal classification
IEC 60085 GB/T 11021
电工电子产品自然环境条件温度和湿度
Classification of environmental conditions Part 2-1: Environmental conditions appearing in nature-Temperature and humidity
IEC 60072-2-1 GB/T 4797.1
标准电压
Standard voltages
IEC 60038 GB/T 156

Product use environment

环境
适台IP55防护等级的安装
低于或等于海拔i1000米
环境温度在-15℃-40℃
相对湿度
Operating Environment
Suitable for IP55 installations
Altitude not exceed 1000m
Ambient temperature -15℃ - 40℃
Relative humidity
温度 Temperature 相对湿度 Relative Humidity
-15℃ ≤ T ≤ 20℃ 100%
20℃ ≤ T ≤ 30℃ 95%
30℃ ≤ T ≤ 40℃ 55%

如果环境温度和海拔高度不同,电机功率要考虑以下系数作选型
Motor Powers will be considered according to following data,if the ambient temperature and altitude are different
<30℃ 30℃~40℃ 45℃ 50℃ 55℃ 60℃
1000m 1.07 1.00 0.96 0.92 0.87 0.82
1500m 1.04 0.97 0.93 0.89 0.84 0.79
2000m 1.00 0.94 0.90 0.86 0.82 0.77
2500m 0.96 0.90 0.86 0.83 0.78 0.74
3000m 0.92 0.86 0.82 0.79 0.75 0.70
3500m 0.88 0.82 0.79 0.75 0.71 0.67
4000m 0.82 0.77 0.74 0.71 0.67 0.63

 
       YOU CAN CONTACT US IMMEDIATELY:
Name:
*
Phone:
Email:
*
Other Contact:
Topic:
Contents:
*
Verification Code:
2649 *